|
|
|
|
|
| |
|
|
|
Acme Radiant
 
|
The Acme Radiant is a variation of the classic Derby lighting effect but has been updated with a 10W Tri colour LED light source and a total of 40 lenses. The 10W LED offers an output that out performs traditional 250W effects and has the colours you would usually find in a fixture fitted with a discharge lamp. Further technological enhancements, such as super-smooth micro stepping motors ensure a fluid and exciting display as a magnitude of coloured beams slice through the air, sweep your dance floor and strobe in nightclub quality style. Unlike traditional Derby effects, the Radiant has no duty cycle, generates very little heat and doesn't require regular lamp replacement. A 4 button LED display on the rear allows users to select from DMX, Stand alone, Sound active and Master/Slave. An optional CA-8 controller can be connected for finger tip control over the units many functions.
|
| Features |
- DMX channels: 3
DMX, master/slave and sound active modes
- LED: 1 x 10W Tri-colour RGB LED
- Built-in light shows under the master/slave mode triggered by music
- Full range dimmer and strobe effects
- Optional CA-8 hand controller for instant lighting shows at your fingertips
- LED display for easy navigation
- Ideal for discos, clubs, bars and mobile DJs etc
|
Specifications |
- Power supply: 240V
- Power consumption: 26W
- Dimensions: 302 x 236 x 212mm
- Weight: 4.8Kgs
|
|
|
|
Acme Fury |
|
From the outside the Acme Fury looks like a classic derby effect with rotating, crisscrossing multi-colored beams. With the help of the next generation of LEDs it has been transformed into a modern icon of LED technology.
With a total of 20W (2 x 10W Quad colour) high-powered LEDs, this reworked classic effect provides DJs with preprogrammed shows using the crisp coloured beams in different combinations filling any floor or room. Strobing is built-in to the automated programmes and can be controlled along with Blackout via the optional CA-8 controller.
Mode selection is by means of a 4 button LED display on the rear of the unit and operating modes include: Sound active, Master/Slave and DMX.
|
| Features |
- DMX channels: 1/3 selectable
- DMX, master/slave and sound active modes
- LED: 2 x 10W Quad colour RGBW LEDs
- Built-in lighting shows under the master/slave mode triggered by music
- Full range dimmer and strobe effects
- IEC Power In/Out sockets
- Optional CA-8 hand controller for instant lighting shows at your fingertips
- LED display for easy navigation
- Ideal for discos, clubs, bars and mobile DJs etc
|
|
Specifications |
- Power supply: 240V
- Power consumption: 39W
- Dimensions: 269 x 271 x 140mm
- Weight: 4.1 Kgs
|
|
|
|
Acme Rage |
 |
Fitted with 28 lenses, The Acme Rage is a 20W (2 x 10W Tri colour) high-powered DMX-controllable Derby effect suited for large areas. It projects multi-coloured crisscrossing beams at controllable speeds and in the absence of a DMX signal it responds to sound with a combination of beam rotation and strobing that brings excitement and variety to the show. Further control of the programmes, blackout and strobing can be facilitated by using the optional CA-8 controller.
Mode selection is by means of a 4 button LED display on the rear of the unit and operating modes include: Sound active, Master/Slave and DMX.
|
| Features |
- DMX channels: 3
- DMX, master/slave and sound active modes
- LED: 2 x 10W Tri-colour RGB LEDs
- Great built-in lighting shows under the master/slave mode triggered by music
- Full range dimmer and strobe effects
- IEC Power In/Out sockets
- Optional CA-8 hand controller for instant lighting shows at your fingertips
- LED display for easy navigation
- Ideal for discos, clubs, bars and mobile DJs etc
|
Specifications |
- Power supply: 240V
- Power consumption: 39W
- Dimensions: 269 x 271 x 140mm
- Weight: 4.1 Kgs
|
|
|
Acme Matrix
 |
Acme have done it again with another innovative LED effect. The Matrix is a breathtaking addition to their amazing family of RGBW LED effects which include the LittLED, MarveLED and industry favorite the impossibLED. Acme have devised a totally new and different kind of effect by programming the 256 red, green, blue and white 5mm LEDs to produce unique patterns, matrixes, grids, squares, and other geometric designs.
The Matrix can be run as a sound activated effect to its own built-in programmes and linked in Master/Slave fashion but comes into its own when controlled by DMX allowing users to create their own customized effects as the 256 LEDs can be controlled separately. It features 2 DMX operating modes: 4-channel and 256-channel, selectable from a convenient 4 button LED DMX display. The unit can also be operated with the CA-8 remote controller (sold separately), which provides control over basic functions like blackout, strobing and programme selection.
|
| Features |
- 256 razor sharp Red, Green, Blue & White Beams
- Produces unique and exciting LED patterns that may be projected on a wall, ceiling or dance floor 256 x 5mm LEDs : 64 Red, 64 Green, 64 blue and 64 White
- 2 DMX Channel Modes (4 Channel mode or 256 Channel mode)
- 4-Button LED DMX Display
- Linkable via XLR connections
- Wide beam spread covers a large area
- 3 operation modes: DMX, Sound Active & Master/Slave
- Sound active from built-in programs
- Optional CA-8 hand controller
- Strobe function
- Beam angle: 50 degrees
|
| Specifications |
- Power supply: 240V
- Dimensions: 270 x 242 x 317mm
- Weight: 3.8kgs
|
|
|
|
[ ]
Henrys Electronics Ltd
Need Any Help? Call: 0845 230 1175 (9.30am - 5.30pm - 6 Days)
404 Edgware Road, London, W2 1ED, United Kingdom  Email
Fax : 020 7724 0322 VAT Number : GB 241 7629 61
Last Up dated and Validate December 2010. layout and design © Henrys 2002-2010
|
|
|
|
Products may vary from illustration, subject to availability. If unavailable,
will be contacted within 48 Hours, otherwise dispatch time usually 2-7 Working Days.
|
|
